Network Settings
2015/05/01 |
[1] | Change to static IP addres if you use Debian as a server. |
root@dlp:~#
vi /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 # comment out # iface eth0 inet dhcp# add follows iface eth0 inet static
address 10.0.0.30 # IP address network 10.0.0.0 # network address netmask 255.255.255.0 # subnet mask broadcast 10.0.0.255 # broadcast address gateway 10.0.0.1 # default gateway dns-nameservers 10.0.0.10 # name server systemctl restart ifup@eth0 |
[2] | Disable IPv6 if not needed. |
root@dlp:~# echo "net.ipv6.conf.all.disable_ipv6 = 1" >> /etc/sysctl.conf root@dlp:~# sysctl -p net.ipv6.conf.all.disable_ipv6 = 1 root@dlp:~# eth0 Link encap:Ethernet HWaddr 00:0c:29:9d:56:58 inet addr:10.0.0.30 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:346 errors:0 dropped:0 overruns:0 frame:0 TX packets:263 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:33839 (33.0 KiB) TX bytes:32449 (31.6 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) |